The Clear-Com CC-300 (single-ear) headset is a high-performance unit that features a single high ambient-noise attenuation earpiece plus a dynamic cardioid microphone that provides high-quality, top-of-the-line audio. Its soft ear pad combined with full adjustability offers ultimate comfort over long periods. Simply moving the 300° rotating mic boom up and down toggles the on/off microphone mute, while the gooseneck design allows for perfect positioning. The cable terminates in a 4-pin female XLR connector.

Feature

• 300ᵒ boom swivel allows left or right hand mic setup
• Boom rotation ON/OFF switch for quick microphone muting
• 40 Hz - 20 kHz frequency response
• Interchangeable cabling for easy connector changing and repair
• Leatherette Ear pads

Specifications

• Driver: 40mm diameter, neodymium magnet, copper-clad aluminium wire voice coil
• Headphone Frequency Response: 40 Hz - 20 kHz
• Weight: 245 g
• Leatherette Earpads
• Dynamic Microphone
• Hypercardioid polar pattern
• Microphone Frequency Response: 300 Hz - 20 kHz
• Open Circuit Sensitivity: -61.0 dB ±3.5 dB; at 1 kHz, typical
• Sensitivity: 102 dB ±3 dB; at 1kHz typical
• Headphone Impedance: 400 Ω ±30%; at 1 kHz typical
• Microphone Impedance: 200 Ω ±30%; at 1 kHz typical
• Cable: 5ft (1.55m) long with 8-pin connector at headset end; 4-pin XLR-Fat opposite end
• Packaging Dimensions (W x H x D): 4.8" x 13" x 10.43" (122 x 330 x 265mm)
• Weight: 8.6 oz. (245 g) without 8-pin cable assembly and M3*18mm screw

 THIS IS AN HME PRODUCT, REFURBISHED BY XMOD,LLC. COVERED ONLY BY XMOD WARRANTY, NOT COVERED UNDER HME WARRANTY.

CC-300 and CC-400 Headsets

Drive Thru Intercom System Kit

Intercom Accessories

A versatile high performance range of headsets designed to give excellent audio quality, comfort and ease of use to suit every need.
Description
The CC-300 (single-ear) and CC-400 (double-ear) headsets feature high performance head-phones and cardioid dynamic microphone that provide high quality audio.
Operation
The CC-300 and CC-400 headsets can be easily adjusted to accommodate the preference of any user. The microphone boom has a 300° rotation to allow the microphone to be worn on the left or right side of the head. Users can make the headset larger or smaller by using the slide adjusts on either side of the headband. Cushioned with super-soft leatherette padding, the headphones sit on the ear to provide a comfortable fit for users. A rotating, flexible gooseneck is included for optimal positioning.
Integrated Mute Switch Operation
The CC-300 and CC-400 headset microphones can be turned on and off by moving the microphone boom. To turn ON the microphone, pull the boom gently downwards (past the 10 o’clock/2 o’clock position). To turn the microphone OFF, push the boom gently upwards (above the 10 o’clock/ 2 o’clock position).
Interchangeable Cabling
The CC-300 and CC-400 headsets have been designed so that the cabling and connector type can be adapted quickly to the application. Users can order cables with different XLR connector choices and appropriate pin-outs. To change the connector cable in the field, simply disconnect the cable from the headset and exchange the cable with a standard Phillips screwdriver. The same process can be used to repair and replace a damaged cable on the fly.

Order Codes
CC-300-X4: Single-ear 4-pin Female XLR
CC-300-X5: Single-ear 5-pin Male XLR
CC-300-X6: Single-ear 6-pin male XLR (balanced mic)
CC-300-X7: Single-ear 7-pin Female XLR
CC-300-Y5: Single-ear 5-pin Female XLR
CC-300-B6: Single-ear no connector
CC-400-X4: Double-ear 4-pin Female XLR
CC-400-X5: Double-ear 5 pin Male XLR
CC-400-X6: Double-ear 6-pin male XLR (balanced mic)
CC-400-X7: Double-ear 7-pin Female XLR
CC-400-Y5: Double-ear 5-pin Female XLR
CC-400-B6: Double-ear no connector

HME Drive Thru Intercom System - NEXEO HDX - EOS

Drive Thru Headset Repair G29652-1

Drive Thru Headset System.

Drive Thru Vehicle Detection.

Ultrasonic Vehicle Detector - Loop Sensor - Sonar Detector

UTAH - Nationwide Service & Sales

XMOD Authorized Dealer.

Drive Thru Intercom System Kit